This mod adds Ford GT90 Concept for Car Mechanic Simulator 2018 mods.
The best car to never make it to production.
The Ford GT90 is a high performance concept car that was developed and manufactured by Ford. It was unveiled in January 1995 at the Detroit Auto Show.
The mid-engined GT90 is a spiritual successor to the Ford GT40, taking from it some styling cues, such as doors that cut into the roofline, but little else. In regard to angles and glass, the Ford GT90 was the first Ford to display the company’s “New Edge” design philosophy. The GT90 was built around a honeycomb-section aluminum monocoque (Borrowed from the Jaguar XJ220) and its body panels were molded from carbon fiber.
The GT90’s 48-valve V12 is constructed on an aluminium block and head, displaces 6.0-litres, and produces an estimated 720 hp (537 kW) and 660 lb⋅ft (895 N⋅m) of torque. It has a redline of 6,300 rpm. It is equipped with a forced induction system that uses four Garrett T2 turbochargers. The engine architecture was based on the 90-degree Ford Modular engine family utilizing a layout similar to that of a paired set of 4.6-litre V8 engines, of which each had 2 cylinders removed. This yielded a 90-degree V12. The exhaust of the GT90 gets so hot that it would be enough to damage the body panels, and thus ceramic tiles, similar to those on the Space Shuttle, are used to keep the car from melting.
The power produced by the engine is delivered to the rear-wheels through a 5-speed manual transmission developed jointly by FF Developments and Ricardo.
The suspension is a double wishbone variant. The steering is a power-assisted rack-and-pinion. The brakes are ventilated discs.
The GT90, according to Ford, was capable of accelerating from 0–60 mph (0–97 km/h) in 3.1 seconds, 0–100 mph (0–161 km/h) in 6.2 seconds, and had a quarter mile (400 m) time of 10.9 seconds at 140 mph (225 km/h). Top speed was Estimated as 253 mph (407 km/h).
The GT90 was built as a secret project by a small engineering team in just over six months. It shared many components including the transmission and chassis from the Jaguar XJ220, as Jaguar was also owned by Ford at the time. The V12 engine, unique to the GT90, was developed by using a Lincoln Town Car as a test mule, in which they put the prototype engine in order to refine it.
The GT90 was originally going to be the successor to the Ford GT40 and Ford GT70, and the predecessor to the Ford GT, However, allegedly engineers had concerns about the glass roof imploding at high speed, the engine block couldn’t handle full boost pressure, and ford fans at the time hated the styling
The Ford GT90 appeared in the video games Need for Speed II, Sega GT 2002, Sega GT Online, Ford Racing 2, Ford Racing 3, Gran Turismo 2, Rush 2: Extreme Racing USA, TOCA Race Driver 2, TOCA Race Driver 3, Project Gotham Racing 3 and Ford Street Racing. The car was featured on Top Gear in a 1995 issue tested by Jeremy Clarkson, while the car was still planned to enter production.
This mod contains 4 versions of the GT90, The original Concept car, and a theoretical final production road car and a GT-1 version. Also included is a Replica version, fitted with a V8 and worth a lot less
Pagani DLC – Needed for the engine for the concept, road car and GT-1 versions
Ford DLC – Needed for factory wheels, you can ignore this
How to Install Mod in car mechanic simulator 2018:
Download the file. Unzip the archive. Copy the folder to the folder “Car Mechanic Simulator 2018/cms2018_Data/StreamingAssets/Car”.
Avoid double folders, look carefully so that there is a folder with the name of the car and its files.
- Pagani DLC
- Ford DLC
Ford GT90 Concept for Car Mechanic Simulator 2018